MK5 Electric Multi-piece Opening and Closing Helmet Voice Control Iron Man Helmet
17 reviews · Write a review
17 reviews · Write a review
Characters : Iron Man
Material : ABS
Full Set Including : MK5 Iron Man Helmet, Remote Control. Tips: The battery needs to be purchased separately. Mask A and Mask B Helmet Battery Model: AA(In the US) / U12 or HP7 (In the UK) Battery*4. Remote Control Battery Model: Mask A: AAA (In the US) / U16 or HP16 (In the UK) Battery*2, Mask B: AAA (In the US) / U16 or HP16 (In the UK) Battery*1.
As we know the Iron Man MK5 helmet features the miniature plates. The point of making this helmet is to achieve the ways they rise and close.
With 4 months of redesigning the structure for both electric assembles and model buildings. We finally completed the eventual iron man mk5 helmet. The one you see in this video is a sample, it’s not for sale but only for demonstration. Each of the helmets in the further producing will be same as this one:
Material: ABS plastic.
Painting: Chromed Paint
* Totally 35 pieces assembled. 6 servos installed, 2 boards and 3 CPU work as the code’s demanded procedure.
Eye lights are changeable between white and red.
Need to buy 4 pieces of AA batteries separately
One helmet is packed in a color box and a brown outer box
An instruction sheet will be included
Helmet use function introduction:
Install AA battery and turn on the power switch of the helmet chin.
Touch the left ear sensing area: control the multi-piece mask open/close.
Touch the sensing area of the right ear: control the integral opening/closing of the mask.
English control instructions.
Before operating a command, you need to execute "Hello, Jarvis" to wake up the system to perform subsequent command operations. Within 30 seconds of the effective time of waking up the system, you can continuously input voice operation commands in sequence.
If the eye lights continue to flicker slowly, or the action is slow, the sound effect is blurred, and the battery is too low, replace the battery with a new one.
Operation failure, abnormal situation occurs, restart the system.
Wear a helmet, automatically detect failures, and restart the system.
Safe operation warning:
Precautions for power-on: Before turning on the helmet each time (or when restarting the system power), ensure that the mask is closed smoothly before turning it on. If the mask is partially or fully opened, you need to gently close all parts manually to ensure that the mask is closed smoothly Turn it on again. If the product is not used for a long time, please remove the battery.
How To Measure
It's suggested to have someone else to measure for you. If you have any other special requirement, please white it in Comments on the Checkout page!
Measure the distance from the top of the head to the soles of the feet!
Measure around chest/bust at fullest point. For female, please wear a bra when doing this measuremen
Measure around the smallest part of your waistline, it's also called natural waistline, at the point where your trousers would normally ride. Keep one finger between the tape and your body.
Measure around the fullest part of your hips, keeping the tape parallel to the floor
It's across shoulder from right shoulder joint to left shoulder joint instead of in circumference
Measure shoulder point to wrist through your elbow.
Upper Arm Circumference
Measured around the fullest part of your arm.
Neck to Crotch Area
Measure from the shoulder to the crotch area.
Measure end of inner thigh to ankle.
Measure the fullest part of the thigh
Measure the fullest part of the calf.
Measure the length at your foot.
Measure the width at the widest part(at the ball of your foot).
Measure the length from your heel to your longest toe.
From the bottom to the desired position.